T O P

OG 135I ENGINE IS COMPLETELY TORN APART!

OG 135I ENGINE IS COMPLETELY TORN APART!

via-via-gekregen

In this video limpnick discovers that dry ice blasting doesn't make all the oil sludge evaporate into thin air and his floor is fokked now dood


positivenihlist

For the life of me I’m not sure why they didn’t pressure wash a good chunk of the shit off of it with a bit of degreaser, and then use the dry ice to blast the little bits off after and get the crevices and shit. I would assume it would have taken less than half the time and been far less of a hassle to clean up.


6a133ttVR4Galant

Because mot the knower of all things told them not to degrease it. 8+ hrs wasted when it should've taken a hour.


deadarsebruh427

I'm sure he told them not to do it just to fuck with them; his employees degrease shit before ice blasting


positivenihlist

Is there any reason why they decided to leave all the manifolds open as well? I haven’t paid attention to what exactly they’re doing but having a bunch of residual moisture and flying bits of decayed oil shooting into your intake seems like a pretty terrible idea.


6a133ttVR4Galant

That will be all cleaned when they have JP clean the valves, I assume? Otherwise, no idea.


[deleted]

[удалено]


jdgsr

It was on rudniks ig story, that head is immaculate.


DooceBigalo

yeah JP had it done quick


iamnotthatguyiamme

I'm kind of/kind of not surprised tommy didn't teach them this.


6a133ttVR4Galant

He told them not to degrease it. 😂


CT9A_RS

Did he really? That’s fucking hilarious. I thought he just said something like “you should do it because I’ve never seen it work on something that grimey”


Markkallevig

He did


CT9A_RS

Lol what an idiot


AnalogiPod

Tommy saw that opportunity to see what happens without having to actually do the work haha


juanclack

Exactly. Used them as guinea pigs to see how well it would do on probably the dirtiest vehicle that’s ever going to roll into that shop.


y6mnn

Exactly this


Cammerv8

ever since they started pulling the engine he keep over selling the dryice blaster, saying he does not need to degrease it, that everything will go away.


Mimik116

He just likes to see people suffer.


6a133ttVR4Galant

That was my thought. Pure schadenfreude.


Kinoptic57

It’s a positive for him. He wanted to show the power of dry ice blasting.


dr_drippy

I feel like ruddy is trying to be like tom always ragging on will….


og47790

Chris gets bullied by Tom so he goes and takes it out on will lol


Shimoshamman

Engines gunna grenade "ah dood fuck it we made a sticker for will so he can get a new engine!" 135 proceeds to sit in tommys parking lot until we see it unceremoniously disappear in 6 months time, roughly the same time wills gotta go deal with his grandmas glaucoma in poland


golden11lead

I was gonna offer will 2k after he blew it up and wanted to sell it, maybe I should wait til after it blows up or he wrecks it lol


Notonion1

Gotta remember the famous car tax this would have attached to it


Lazy_Air7237

Even if these fellas get the new timing chain on, I am willing to bet 20 miles into its first drive it will get a check engine light for cam crank correlation.


danlongqua

We all know how the Ricer Miata engine rebuild ended up..


golden11lead

I will bet my life that this happens


Josiah2402

I'll be back when this car is finished to see. Remindme! 4 years


RemindMeBot

I will be messaging you in 4 years on [**2025-09-22 02:16:40 UTC**](http://www.wolframalpha.com/input/?i=2025-09-22%2002:16:40%20UTC%20To%20Local%20Time) to remind you of [**this link**](https://www.reddit.com/r/HaggardGarage/comments/psrikl/og_135i_engine_is_completely_torn_apart/hdsp98b/?context=3) [**4 OTHERS CLICKED THIS LINK**](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5Bhttps%3A%2F%2Fwww.reddit.com%2Fr%2FHaggardGarage%2Fcomments%2Fpsrikl%2Fog_135i_engine_is_completely_torn_apart%2Fhdsp98b%2F%5D%0A%0ARemindMe%21%202025-09-22%2002%3A16%3A40%20UTC) to send a PM to also be reminded and to reduce spam. ^(Parent commenter can ) [^(delete this message to hide from others.)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Delete%20Comment&message=Delete%21%20psrikl) ***** |[^(Info)](https://www.reddit.com/r/RemindMeBot/comments/e1bko7/remindmebot_info_v21/)|[^(Custom)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5BLink%20or%20message%20inside%20square%20brackets%5D%0A%0ARemindMe%21%20Time%20period%20here)|[^(Your Reminders)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=List%20Of%20Reminders&message=MyReminders%21)|[^(Feedback)](https://www.reddit.com/message/compose/?to=Watchful1&subject=RemindMeBot%20Feedback)| |-|-|-|-|


pfthr0w

I actually really like the addition of Will on the channel. I feel like Im watching myself when I was that age working on cars getting frustrated trying to figure stuff out. That BMW is a massive project to get working correctly.


KawiNinjaZX

Will got a lot better as he grew up.


maoriboy3344

Quite a genuine guy - can tell how he interacts, you won’t hear him put down anyone even when getting destroyed by MOt and Rud.


hellyeah_bruther

Still pretty shit at wrenching though.


sendnoodez

Probably good enough to work at hp logics.


PstainGTR

Yeah but im gonna give him props for going for it though. Unlike many others. Just look at rudnik. He doesnt do shit and everytime he is starting something he ends up pointing the camera at others doing the work for him. Unless its a clutch change. Then he waits until everything is take off and he smacks the new disc and pressure plate on,says he haw fixed it and watches his gimps put it together again.


Cammerv8

damn you just made me realize, that ever since the accident rudnick has not turn a Wrench on his vehicle unless he is out of time or alone. but he had jordan then the randos, then Matt and now Will. every time they are working on something, you can see someone is working and he is just passing. or "filming". damn this fuck become super lazy


PstainGTR

He had first his mom then grillo wipe his ass for months. Why would he go on to do things himself when he literally had people cleaning shit out of his ass.. hes never gonna touch a tool again in his life and im sure he doesnt wipe if noone is around to do it.


Cammerv8

Rudnick out here trying to be Tommy on a budget.


PstainGTR

Nah he is just straight up lazy as fuck


Maciejk8

Wonder how FCP will hook him up.


golden11lead

Probably give him all the expensive parts or a fat hookup. I wish they sponsored people that actually know what theyre doing not just retards. But thats how marketing goes i guess


Adri4n_

FCP and maxpeedingrods seem to sponsor anyone no matter who they are or how many subs they have. I seen 5k subs channels sponsored by FCP. I guess they would rather send free parts to a smaller channel for exposure rather than free parts + paycheck to bigger channels.


802Garage

As a smaller channel, I can absolutely say we will work our ASSES off for a legit company willing to help us. They build TONS of long term good will and cheap advertising if they help people out while they are small and not just big. MaXpeedingRods is similar. Everyone knows they are cheapest, not best. When they are friendly and willing to give you what you need though, it goes a long way! The easier a company is to work with and the more giving they are, the more positive feedback they will get from who they sponsor. We also don't forget who helped us when we were small. :)


Mimik116

they sponsor LegitStreetCars. The dude is legit. Also a company such as theirs spends money for publicity, not to just pleasure some shmucks.


golden11lead

Yeah, i just think marketing to randoms on a channel not based on FCPs core consumer base isnt a move Id make. Id rather sponsor a channel with half the subs that has a correlation with bmw that would probably net more sales than strapnik


Cammerv8

i think they will sell it to them at cost. or since they are in CT they can get the Freemium discount if they just go and get the parts from their warehouse. remember sometimes a Sponsor video is up in the thousands of dollar. if they send him 500-1000 worth of part ( cost to them) and they get a sponsor couple of videos is a great value for the publicity.


chryopsy

This is going to be wild watching them put this back together.


thatkided

Really hope they use the correct tools and torque to assemble the head back.


[deleted]

[удалено]


RussianBearsEatYou

5 Ugga duggas on a non impact torx bit


Onli-Wan-Kenoli

Better than a fucking hammer and a wrench


RoadWarrior86

Everytime i watch a new video of this series i try to guess on whos going to come in and unfuck the situation.


Cammerv8

Josh or TJ. BUT if people make a big deal about it and start spamming the videos with " tommy and his crew gonna have to put wills engine back together", they will not show it and will make it seem like they put it together. until tommys video of the same day comes out showing Josh or TJ wrenching while Will watches


RoadWarrior86

I really hope they get it back together honestly.


StackedWell

Watching them remove the injectors was like a monkey tryna fuck a football haha Also, who the hell wears khaki's all the time working on cars, like I saw someone comment about it two weeks ago but you'd think the kid would've realized by now it ain't the move ffs. Anotha torrington time warp trend i guess haha


coloredinlight

Remember when ruddy constantly wore the same sweatpants and they just got more and more disgusting every day. I know TTW and all but there's a reason mot and Jim wear black all the time.


ScotchAdmin

>Watching them remove the injectors was like a monkey tryna fuck a football haha These idiots would risk ovaling out the holes where the injectors seat and junking the entire head, than spend 50 dollars and rent the correct tool for the job.


Homeslice10

If MOT was smart he would 86 the fuck out of those 2 morons from coming anywhere near the interior of his cars with all the filth they are always covered in, I know I would!


KawiNinjaZX

I think its going to take a lot of outside help but I think they can get this running again.


y6mnn

What a shit show, but I'm here for it!!!


MankeyManksyo

What ever happened to Spencer?


KarmanSS

Poland


codenamepeabrain

I thought he opened a gift store in the local mall


Cammerv8

dude spencer did some dealer work then decided to ultra modify his E36, took engine out did everything like lil will and slapped a turbo on there. issue is that Car never ran, or ran so bad he had to pull it out a couple of times ( i think ruddy film one of those pulls) after he could not figure shit out or the engine just blew , he decided to put an 1JZ on the car. go to his intagram and you'll see he still not done.


E36s

I think that’s a different E36 to the most recent one on his Instagram. He had a beat up E36 328i coupe with a turbo setup, looks like he’s now building a 1JZ E36 M3.


Cammerv8

if thats the case. both are black. and he did a turbo set up on a Beat up e36 then i dont know if he modified that one to be an M3 or he just got a new shell


E36s

https://www.instagram.com/p/B5tr_chn2K_/?utm_medium=copy_link Looks like he bought a beat up E36 M3 to replace his beat up 328i


mashingLumpkins

Haha I still can’t believe Tommy convinced them to NOT degrease it first.


iamnotthatguyiamme

lol as predicted the shop is a huge mess from dry ice blasting. all the sludge on the engine is now on the floor lmfao.


PstainGTR

That floor looked like shit before though. Dont really get why he's stressing it. Its just more aids spec.


Adri4n_

I never heard "dood" being said so many times in a single video, holy shit, Will is as bad as Rudnik when it comes to "dood".


E36s

Try 15 dude


CXNNER

I read this in Tommy's voice immediately.


Maciejk8

Dood


NippyMoto_1

There's no fucking way this car is getting put back together without Tommy's men getting involved.


ItSmellsLikeEther

The fucking text notifications are annoying as shit.


zaccari33

so will is as retarded as derpnick? tries spinning engine on stand "put your foot down on the stand" proceeds to put the foot down on the same side hes trying to turn it too what a pack of dumbasses


NMentality_AGG

Saw that and thought we would get ruddy commentary but seems as though they’re both on equal playing field when it comes to objects dynamics lol.


zaccari33

what are physics?


NippyMoto_1

Will is a full blown retard. Just because he showers and looks better than the standard degenerates Rudnik brings doesn't mean he isn't one of them.


zaccari33

and then uses his bare hands on that wire pull.. jesus fuck they are dumb


MandingosCock

There’s 0% chance this engine gets put back in the 135.


Cementdascomcretebby

In a week or two chris will say something about swapping it instead then it will never get done


MandingosCock

Tommy is gonna come in and convince them to swap some LS into it. Mot always wanted to put an S65 in that 135…not the same, but close enough.


rotary_13b

They’ll end up putting the current Colorado engine in it when the new one comes in


BecomingThor

Prolly unpopular opinion, but rudnik is just getting more and more annoying each video.


HashiriyaStyle

No, thats been the popular opinion for the entire year.


junkiesietze

The fake laughing every 3 seconds kills me


NippyMoto_1

No very popular opinion. I hate when he fake laughs constantly, talks out the side of his mouth, does that cali girl voice etc etc.


Mimik116

I hope Will won't get quick released too soon. I like the guy. But with Ruddy you never know.


cbocks

Will is good for views and should be able to do some work on chris' turds. Even if it takes will 3x as long as it should, it will still be better than Chris doing it. I only see him getting rid of will if he gets money hungry after winter ad season. Or will just leaves because of the tommy bullying.


y6mnn

I can see Will leaving due to the harassment from Tommy lol so far he has been playing good sport so he can use his shop etc


Cammerv8

Will wont get quick released at least not in the normal way. they are long time friends, so is not like jordan or matt. but you have seen his pattern on the videos ever since the accident. he comes in gets a mechanic, he ROAST the shit out of it untill they either responds back or just straight leave to polland. i think Will will stay as a side character. even if he stops being the mechanic. BTW i have seen a couple of time that tommy mentions he is on the clock. i think rudnick has him either working on his shit 9-5ish and then is "afterwork" for his engine.


Mimik116

Yeah, it's kind of fucked up. I mean, between friends, he could work "flexible hours", but ruddy makes sure to get every penny out of the wage he's paying Will and then makes content on his after work 😂


DooceBigalo

I dont think they have a set working time, they're there all day long sometimes


Cammerv8

then why i hear tommy and Will talking about he being "on the clock" and "after work".


browsk

This engine is so fucked it’s not even funny (ok kinda still is). IF it even makes it back into the car, it will never run right and it’s going to just disappear off the channel.


golden11lead

Imagine being sponsored with a bunch of nice parts and not even bothering to research the engine and the correct dissasembly method These dudes aint pushing 600 after they raped that engine


Cammerv8

the least they could have done is get the repair manual. is like 20 bucks if you get the online Haynes. but probably there is like a physical one they can use. cuz for real looks like will is just unbolting shit as he goes instead of following a guide


golden11lead

Yeah, he definetly raped that cam adjuster off. Wouldnt be suprised if they cheaped out and reused the shitty aluminum OTU bolts.


Cammerv8

i bet will have not search which ones he can reuse If any.


golden11lead

Nah they dont know shit, its actually depressing af if youre into e series bmws. Super clean 135i gonna be a pos soon bc they cant spend 5 minutes and look into the proper dissasembly


rikki3999

It wasn't super clean, lol.


golden11lead

Spec was fire tho


mashingLumpkins

I reaaaaalllllly hope Will is getting a proper amount of the revenue for these videos. He paid for all the parts and it’s his car, and he’s doing all the work.


Gasaone

I think will would just be happy he has somewhere solid to work on it instead of a driveway. I know I would be


PoppaFixIt

And he has to put up with m0ts harassment too. Treats him like he's an absolute idiot and he's just gotta smile and take it if he wants to use that shop.


rikki3999

Don't these stonebags have any torx and e-torx bits/sockets?


jaaagman

They really shouldn't be working on an N54. Neither of them seem to know this engine well, and I doubt that they're as forgiving as JDM engines if you make a mistake (don't follow torque specs, etc.) I don't get the sense that Will has the mechanical know-how or experience to work on this either.


y6mnn

Will strikes me as a dude having the same mechanical knowledge as your home driveway jackstands diy-er


rikki3999

Fuckbags pull out VANOS solenoids and call them sensors, what the fuck.


PstainGTR

That engine is never running again atleast not right.


golden11lead

They just raped the cam adjusters its not tunning unless they replace them lmfao


PoppaFixIt

I'm putting the over/under miles after rebuild until catastrophic failure at 50 miles. You taking the over or under?


PstainGTR

I dont think it will run at all. Gonna have a problem they cant find fix and it will be sold or pushed back into the woods.


HendyHauler

IMO big mistake doing a headgasket lol above their level of mechanical skill. Car will never run right I'm calling it now.


NeOxXt

Was the "ping" when trying to loosen the cam gears the bolt cracking loose or was it something spring loaded in the gear for variable valve timing he popped without some kind of holder tool? Find out next week!


golden11lead

Not sure how they work but I know if they make that sound theyre dead LOL


NeOxXt

I've built some LSs and some Honda boi stuff, which is caveman shit. I did the head on my SVT Focus and that was built by Cosworth. The timing gear would fill with oil and was spring loaded to replicate something like VTEC. I had the factory tools and couldn't get it right for the life of me. Gear had to be preloaded, held and then the belt put on. I sent it off to someone smarter than myself.


rikki3999

Not 100% sure, but doesn't seem to be based on schematics: [https://www.realoem.com/bmw/enUS/showparts?id=UN73-USA-05-2010-E88-BMW-135i&diagId=11\_4459](https://www.realoem.com/bmw/enUS/showparts?id=UN73-USA-05-2010-E88-BMW-135i&diagId=11_4459) Also not sure what year this 135i is, but between N54 and N55 the cam gears are same principle.


jdmspacedust

is the mls headgasket really a problem?


Alexxryzhkov

nope, plenty of people run 700whp on stock ones


QFiddy14

I hate how Ruddy sometimes calls Will a frat boy. He’s definitely not a frat boy or dresses like one.


Drum4rum

I dunno. When I was in college all the frat douches wore was boat shoes, kahhhhkis, and either vineyard vines or heinous golf polos. So like. Basically wills entire wardrobe. Then again I'm also just a 12 year old hater. I dunno what fratbros wear these days.